All models

How to fold an origami potted sprout

Fold a green square into a sprout with two pointed leaves, then fold a clay pot with a thick rim and a tapered foot and slip the sprout in behind.

You need: A 15 cm green square, a 15 cm terracotta orange square and a glue stick. Medium, 12 steps, about 9 minutes.

Steps

  1. Sprout: Top edges in. Start with the green square, white side up, a corner at the top. Fold the two upper edges in to meet on the middle line.
  2. Sprout: Bottom edges in. Fold the two lower edges in to the middle too. A long, slim diamond.
  3. Sprout: Slim it. Fold the left and right corners in, creasing 1.5 cm out from the middle line. A slim strip with a point at each end.
  4. Sprout: Fold in half. Fold the bottom point up behind, onto the top point.
  5. Sprout: First leaf. Fold the front point out to the left on a slant, starting 2 cm below the tip. It sticks out as a leaf.
  6. Sprout: Second leaf. Fold the back point out to the right behind it, the same way. Two leaves!
  7. Pot: new sheet. Set the sprout aside. Take the orange square, white side up.
  8. Pot: fold up. Fold the bottom edge up to 3.5 cm below the top edge.
  9. Pot: fold the rim. Fold the white band at the top down over the front. A thick rim!
  10. Pot: sides behind. Fold the left and right sides behind, 2.5 cm in from each edge.
  11. Pot: taper it. Fold the lower corners behind on a slant, from just under the rim to the bottom, so the pot narrows to its foot.
  12. Plant the sprout. Glue the sprout behind the pot, its stem dropping in behind the rim.

It's growing!

Make a row of pots on a paper windowsill, each sprout a little taller.

What to fold next